Abstract:
งานวิจัยชิ้นนี้สนใจการเตรียมแผ่นฟิล์มยางธรรมชาติชนิดโปรตีนต่ำผสมลิกนินเพื่อการนำไปประยุกต์ใช้ในทางการแพทย์ โดยมีจุดมุ่งหมายในการศึกษาอิทธิพลของการเปลี่ยนแปลงปริมาณสารตัวเติม คือ ไฮดรอกซีโพรพิลเมทิลเซลลูโลส (Hydroxypropyl methylcellulose, HPMC) ที่ปริมาณตั้งแต่ 19 phr และกลีเซอรอล (Glycerol, GLY) ที่ ปริมาณ 06 phr เพื่อการปรับปรุงสมบัติเชิงกล สมบัติความเป็นกาว ความสามารถในการต่อต้านเชื้อแบคทีเรีย และความสามารถในการดูดความชื้นของฟิล์มยาง ซึ่งจากการศึกษาพบว่า สามารถเตรียมแผ่นฟิล์มยางธรรมชาติชนิดโปรตีนต่ำผสมลิกนินได้ด้วยการขึ้นรูปแผ่นฟิล์มแบบสองชั้น อันประกอบด้วยชั้นกาวและชั้นเนื้อยาง โดยฟิล์มยางที่เตรียมได้มีการเติม HPMC ที่ปริมาณ 5 phr และ GLY 06 phr ทำให้แข็งแรงทนต่อแรงดึงยืด รวมถึงมีสมบัติความเป็นกาวที่ทัดเทียมกับเทปกาวเชิงพานิชย์ สำหรับความสามารถในการดูดความชื้น การเตรียมฟิล์มยางที่ปริมาณ HPMC 5 phr และ GLY 6 phr ให้ผลดีที่สุดโดยสามารถดูดความชื้นได้มากกว่า 3% ของน้ำหนักฟิล์ม ทางด้านความสามารถในการต่อต้านเชื้อแบคทีเรียในการศึกษานี้ได้มีการเปลี่ยนแปลงปริมาณและชนิดของลิกนินที่เติมลงไปในฟิล์มยาง คือ Lignosulfonate และ Lignin, Alkali ที่ปริมาณ 0.1 1 และ 10 phr โดยใช้การวัดความสามารถในการต้านการยึดเกาะของเชื้อแบคทีเรียเป็นเกณฑ์ ซึ่งผลการทดสอบชี้ให้เห็นว่าที่ปริมาณการเติมลิกนิน10 phr Lignosulfonate สามารถต้านการยึดเกาะของเชื้อแบคทีเรียแกรมบวก Staphylococcus aureus ได้ดีกว่าเชื้อแบคทีเรียแกรมลบ Escherichia coli โดยสามารถลดการยึดเกาะของเชื้อแบคทีเรียได้มากถึง 90% ที่เวลาในการสัมผัสเชื้อ 4 ชั่วโมง ดังนั้นเมื่อพิจารณาสมบัติด้านต่าง ๆ ประกอบกันจึงสามารถสรุปได้ว่าในการเตรียมฟิล์มยางธรรมชาติชนิดโปรตีนต่ำผสมลิกนินนั้นสามารถกระทำได้โดยการเติม HPMC GLY และลิกนินที่ 5 6 และ 10 phr ตามลำดับ
Effects of additives on preparation of low-protein natural rubber pressure sensitive adhesive (PSA) containing lignin for medical purposes were considered. The additives used to enhance mechanical properties, adhesive properties, water uptake, and anti-microbial properties were hydroxypropyl methylcellulose (HPMC) and glycerol (GLY) in the range of 19 phr and 06 phr (part per hundred of dry rubber content), respectively. PSA films were successfully prepared with 5 phr HPMC and GLY of 06 phr via a double-layer method, which consisted of two different layers: adhesive layer and rubber matrix layer. The resulting PSAs had better tensile strength and adhesive properties that were comparable to a commercial adhesive tape used in human. By investigating water uptake of PSAs, the presence of 5 phr HPMC and 6 phr GLY in PSAs was found to be the best candidate as they were able to uptake moisture more than 3% of their weights. Moreover, the PSAs were examined for their anti-microbial property in terms of bacterial adherence. In this part, two types of ligninLignosulfonate and Lignin, Alkaliwere added into PSAs in the amounts of 0.1, 1 and 10 phr. After being immersed in a bacterial suspension for 4 hours, the results shown that the film with 10 phr Lignosulfonate had an ability to reduce the adherence of gram-positive bacteria (Staphylococcus aureus) more than 90%, which was greater than that of gram-negative bacteria (Escherichia coli). By taking consideration of mechanical properties, adhesive properties, water uptake, and anti-microbial properties, the optimal conditions for preparing low-protein natural rubber PSAs were 5 phr HPMC, 6 phr GLY, and 10 phr Lignosulfonate