Abstract:
การวิจัยครั้งนี้เป็นการศึกษาในรูปแบบการจำลองพลศาสตร์อัคคีภัย โดยโปรแกรม Pyrosim ควบคู่กับ Pathfinder กับบริษัทตัดเย็บชุดชั้นในส่งออกแห่งหนึ่งในจังหวัดสมุทรปราการ เป็นอาคารจัดเก็บสินค้ามีขนาด 2,800 ตารางเมตร ได้กำหนดพื้นที่ต้นเหตุในการเกิดเพลิงไหม้ คือจุดชาร์จแบตเตอร์รี่รถยก มีอัตราการปลดปล่อยความร้อนสูง ซึ่งเสี่ยงต่อการระเบิดหรือเกิดเพลิงไหม้ โดยการจำลองการเกิดเพลิงไหม้แบ่งเป็น 3 กรณีศึกษา และการจำลองการอพยพหนีไฟ แบ่งเป็น 3 กรณีศึกษาตามสถานการณ์การเกิดไฟไหม้ต่างๆ จำนวนคนผู้ใช้อาคารสูงสุดคำนวณตามมาตรฐาน มีจำนวนคนทั้งหมด 127 คน ผลการจำลองพบว่าเพลิงที่เกิดขึ้นลุกลามไปทั่วคลังสินค้าอย่างรวดเร็ว โดยมีค่าความร้อนเพิ่มสูงขึ้นเรื่อย ๆ เป็นอุปสรรคต่อการควบคุมเพลิงและเมื่อมีการติดตั้งระบบหัวกระจายน้ำดับเพลิงพบว่าค่าความร้อนหลังจากมีการติดตั้งอุปกรณ์อุณหภูมิจะลดลง ซึ่งแสดงให้เห็นว่าเมื่อเกิดเพลิงไหม้และมีการติดตั้งอุปกรณ์ดับเพลิงอัตโนมัติจะสามารถป้องกันการลุกลามของเพลิงและควบคุมความสูญเสียที่จะเกิดขึ้นทั้งต่อชีวิตและทรัพย์สินได้และในผลของการจำลองการอพยพทั้ง 3 กรณีศึกษา พบว่าเวลาในการอพยพเป็นไปตามกฎหมายประกาศกระทรวงมหาดไทย เรื่องการป้องกันระงับอัคคีภัยในสถานประกอบการเพื่อความปลอดภัยในการทำงานสำหรับลูกจ้าง ซึ่งกำหนดไว้ว่า จะต้องอพยพออกจากที่ทำงานสู่ทางออกสุดท้ายภายในเวลาไม่เกิน 5 นาที (300 วินาที) ซึ่งแสดงว่าเส้นทางหนีไฟเพียงพอต่อความหนาแน่นของจำนวนผู้ใช้อาคารสูงสุดที่สามารถคำนวณได้
This research is a study of the fire dynamics simulation model. By using the Pyrosim program and the Pathfinder program, the establishments used as case studies in this It is an export underwear company in Samut Prakan Province. With a warehouse building with a size of 2,800 square meters, the area that is the cause of the fire has been determined. is the charging point for the forklift battery It has a high heat release rate. which is at risk of explosion or fire. Therefore, the fire simulation was divided into 3 case studies and the fire evacuation simulation was conducted. The case studies were divided into 3 case studies according to various fire situations. The maximum number of building occupants is calculated according to NFPA 101, Lift Safety Code, with a total of 127 people. The simulation results showed that the fire quickly spread through the warehouse. with steadily rising calorific value, hindering fire control and when the fire sprinkler system is installed, it is found that the heat value after the installation of the temperature device is reduced. This shows that when a fire occurs and that automatic fire extinguishing equipment is installed, it can prevent the spread of the fire and control the loss that will occur to both life and property. And in the results of evacuation simulations in all 3 case studies, it was found that the evacuation time was in accordance with the law announced by the Ministry of Interior. Regarding the prevention and suppression of fire in the workplace for safety at work for employees which stipulates that It must be evacuated from the workplace to the final exit in no more than 5 minutes (300 seconds), indicating that the fire escape route is sufficient for the maximum occupancy density that can be calculated.