Abstract:
ตัวเร่งปฏิกิริยา Fe/K-Al2O3 ถูกนำไปพัฒนาโดยการเติมโลหะทรานซิชั่นได้แก่ Co, Mn, V, Zn หรือ Cu เพื่อเพิ่มความว่องไวของปฏิกิริยาและเพิ่มค่าการเลือกเกิดผลิตภัณฑ์โอเลฟินส์เบาจากปฏิกิริยาไฮโดรจิเนชั่นของก๊าซ CO2 การเติมโลหะทรานซิชั่นทำให้เกิดการปรับเปลี่ยนสมบัติการดูดซับ-คายซับของก๊าซ CO2 และก๊าซ H2 บนพื้นผิวตัวเร่งปฏิกิริยา ซึ่งมีผลต่อประสิทธิภาพของตัวเร่งปฏิกิริยาในการเกิดปฏิกิริยาไฮโดรจิเนชั่นของก๊าซ CO2 ไปเป็นโอเลฟินส์เบา พบว่าการเติม Cu หรือ Zn บนตัวเร่งปฏิกิริยา Fe/K-Al2O3 สามารถเพิ่มการดูดซับแบบอ่อนของอะตอมไฮโดรเจน ซึ่งทำให้เกิดการแปลงผันของก๊าซ CO2 มากขึ้น และเกิดผลิตภัณฑ์ที่เป็นไฮโดรคาร์บอนสายโซ่ยาวและผลิตภัณฑ์พาราฟินมากขึ้น การเติม Co บนตัวเร่งปฏิกิริยา Fe/K-Al2O3 สามารถเพิ่มการแปลงผันของก๊าซ CO2 เช่นเดียวกับการเติม Cu หรือ Zn แต่ให้ผลิตภัณฑ์ไฮโดรคาร์บอนสายโซ่สั้น (C1-C4) ด้วยเหตุนี้ทำให้ผลผลิตของโอเลฟินส์เบามีค่าสูงถึง 16.2% การเติม Mn หรือ V บนตัวเร่งปฏิกิริยา Fe/K-Al2O3 สามารถยับยั้งปฏิกิริยาไฮโดรจิเนชั่นของก๊าซ CO ไปเป็นไฮโดรคาร์บอน ทำให้เกิดการแปลงผันของก๊าซ CO2 น้อยลง อย่างไรก็ตาม Mn เป็นตัวโปรโมเตอร์ที่ทำให้การดูดซับแบบอ่อนของอะตอมไฮโดรเจนลดลง ส่งผลให้อัตราส่วนของโอเลฟินส์ต่อพาราฟินมีค่าสูงถึง 7.4 จากนั้นตัวเร่งปฏิกิริยา Fe-Co/K-Al2O3 ถูกนำไปพัฒนาต่อโดยการเติม Zn ที่ปริมาณแตกต่างกัน พบว่าการเติม Zn เพียงเล็กน้อย (0.58wt% ) สามารถเพิ่มผลผลิตของโอเลฟินส์เบา เนื่องจากสามารถเพิ่มกระจายตัวของโลหะออกไซด์ ทำให้โลหะออกไซด์รีดิวซ์ได้ง่ายขึ้น และเพิ่มพื้นที่ว่องไวในการเกิดปฏิกิริยา โดยสภาวะการเร่งปฏิกิริยาที่เหมาะสมคือ อุณหภูมิ 340 องศาเซลเซียส ความดัน 25 บาร์ ความเร็วสเปซ 9,000 มิลลิลิตรต่อน้ำหนักตัวเร่งปฏิกิริยา ต่อชั่วโมง และอัตราส่วนของ H2 ต่อ CO2 เท่ากับ 4 ซึ่งให้ผลผลิตของโอเลฟินส์เบาสูงสุดเท่ากับ 19.9%
Fe/K-Al2O3 -based catalysts have been developed by adding one of following transitions metals including Co, Mn, V, Zn and Cu to enhance activity and selectivity for CO2 hydrogenation to light olefins. The presence of transition metals (Cu, Co, Zn, Mn or V) in Fe/K-Al2O3 , modifying the adsorption-desorption properties of CO2 and H2 with the catalyst surface remarkably influences the catalytic performance for CO2 hydrogenation to light olefins. The addition of either Cu or Zn to Fe/K-Al2O3 significantly increases the number of weakly adsorbed H atom, yielding the high CO2 conversion and shifting the product distribution towards longer chain hydrocarbon with a higher content of paraffins. The addition of Co to Fe/K-Al2O3 also enhances the CO2 conversion but it provides the short chain hydrocarbon (C1 - C4 ) and thus achieving the highest light olefins yield of 16.2%. The presence of either Mn or V inhibits the CO hydrogenation to hydrocarbon, leading to the low CO2 conversion. The Mn promoter reduces the number of weakly adsorbed H atom, lowering the hydrogenation ability of the catalyst, resulting in the highest olefin to paraffin ratio of 7.4. Furthermore, the Fe-Co/KAl2O3 catalyst was further developed by modifying with different Zn contents. The small amount of Zn addition (0.58 wt%) improves the light olefins yield by way of increasing dispersion, facilitating reducibility and increasing number of active sites. The 0.58 wt% Znpromoted Fe-Co/K-Al2O3 catalyst shows superior activity for light olefins yield (19.9%) under the optimum operating conditions as follows: T= 340 o C, P= 25 bar, space velocity of 9,000 mL gcat -1 h -1 and H2 to CO2 ratio = 4.