Abstract:
อุปกรณ์พรวนกลบวัสดุอ้อยแบบไถจานชนิดใช้กำลังขับ ถูกพัฒนาขึ้นเพื่อใช้ในการจัดการวัสดุอ้อยระหว่างแนวอ้อยต่อภายหลังการเก็บเกี่ยวอ้อยด้วยรถตัดอ้อย โดยพัฒนาขึ้นเพื่อพลิกดินกลบใบอ้อยซึ่งเป็นการเพิ่มอินทรียวัตถุในดินและบรรเทาปัญหาการลุกลามของไฟไหม้ในไร่ ป้องกันความเสียหายแก่อ้อยต่ออุปกรณ์พรวนกลบวัสดุอ้อยประกอบด้วย โครงสร้างหลัก ชุดล้อควบคุมความลึกการไถ ชุดจานตัดใบอ้อย ชุดผาลจานใบจักรและระบบส่งกำลัง อุปกรณ์ที่พัฒนาถูกนำมาทดสอบในแปลง สภาพดินไร่ชนิดดินร่วน ค่าเฉลี่ยดัชนีกรวยของดิน (ความต้านทานการแทงทะลุดิน) 1.91 MPa ปริมาณความชื้นในดินและความหนาแน่นมวลรวมสภาพแห้งเท่ากับ 14.41% (db) และ 1.88 g/cm2 ตามลำดับ ทดสอบที่ความเร็วการเดินทางเฉลี่ยของรถแทรกเตอร์ 1.65 และ 2.45 km/h มุมจานไถ 40° และ 42° และความเร็วรอบการหมุนผาลจานใบจักร 130,150 และ 170 rpm ผลการทดสอบแสดงให้เห็นว่าในทุกกรณีของความเร็วการเดินทางของรถแทรกเตอร์ และ ความเร็วรอบการหมุนผาลจานใบจักรการพรวนกลบวัสดุอ้อยด้วยมุมจานไถ 42° อุปกรณ์ไถจาน ชนิดใช้กำลังขับใช้กำลังรวมมากกว่า การพรวนกลบวัสดุอ้อยที่มุมจานไถ 40° และพบว่า ที่ความเร็ว รอบการหมุนผาลจานใบจักร 130, 150 และ 170 rpm ที่มุมจานไถ 42° อุปกรณ์ใช้กำลังรวมสำหรับการพรวนกลบวัสดุอ้อยมากกว่าที่มุมจานไถ 40° โดยประมาณ 8.54 ถึง 11.63%, 13.50 ถึง 28.15% และ 11.72 ถึง 20.40% ตามลำดับ และอุปกรณ์ใช้กำลังรวมในการพรวนกลบดินเพิ่มขึ้นเมื่อความเร็วรถแทรกเตอร์เพิ่มขึ้นโดยพบว่าที่มุมจานไถ 40°ความเร็วรอบการหมุนของผาลจานใบจักร 150 rpm เป็นเงื่อนไขที่เหมาะสมทั้งในกรณีความเร็วการเดินทาง 1.65 และ 2.45 km/h
The sugarcane-trash disk tiller for Small Tractor was developed to cover up sugarcane residue between the rows of ratoon cane after harvesting by cane harvester. It was designed to invert and breakup the soil for covering sugarcane trash and to alleviate the effects of sugarcane burning The sugarcane-trash disk tiller was consisted of five part (i.e. main structure frame, the depth control wheels, a cutting disk, the spiral-notched disks and the power transmission system.) The performance tests were conducted in the upland field. The average soil cone index (soil penetration resistance) was 1.91 MPa. The soil moisture content and the soil dry bulk density were 14.41% (db) and 1.88 g/cm3 respectively. Tests were carried out at the tractor travel speeds of the disk angle angles of 40° and 42° and the revolution speeds of 130, 150 and 170 rpm. The results showed that the total powers used by tractor as the implement working at the disk angle of 42° were higher than the disk angle of 40°. As the implement working at the disk revolution speeds of 130, 150 and 170 rpm, the total power at 42° disk angle were 8.54 11.63%, 13.50 28.15% and 11.72 20.40% higher than 40° disk angle. The total power was increased when travel speed of tractor increased. It was found that the optimum operating condition was 40° disk angle and 150 rpm disk revolution speed at both travel speeds of 1.65 and 2.45 km/h.