Abstract:
This research investigated the feasibility of using sewage sludge and diatomite waste produced by beverage industry for removal of phenol in aqueous solution. Diatomite waste and sewage sludge were treated by chemical and thermal activation for improving adsorption efficiency and subsequently pelletized by extrusion. These adsorbents were characterized for physical and chemical properties using several analytical techniques. Efficiency, kinetics, and isotherms of phenol adsorption were investigated to evaluate effects of activation. Compressive strength of composite adsorbents was studied. The results show that the inorganic component of diatomite waste, silica, led to presence of crystalline cristobalite and quartz. The main functional groups on diatomite waste were siloxane and silanol. Diatomite waste and activated diatomite waste could not adsorb phenol as the result of low surface area. The sewage sludge mainly contains organic carbon with low specific surface area. After the carbonization process with chemical and thermal activations, significant enhancement of porosity and surface area of sludge char was achieved. The adsorbent, which activated by KOH at 800ºC under nitrogen (ASC_KOH_3:1), increased specific surface area to 2,565 m2/g and presented amorphous carbon phase. The adsorption kinetic model followed pseudo second order whereas the adsorption equilibrium was presented by Freundlich isotherm model. The adsorption capacity was 56.07 mg/g at phenol equilibrium concentration 90 mg/L. The adsorption reaction was exothermic process. The optimum pH for highest adsorption capacity was between 3 to 7. Moreover, the composite material from extrusion method is easy to handle. Thus, the adsorbents from this research work can be used as good candidate for phenol removal in aqueous solution.