Abstract:
This research aimed to improve sound insulation and flame retardation property of ethylene vinyl acetate (EVA) used in the automotive industry. In this research, ethylene vinyl acetate was mixed with two elastomers, natural rubber (NR) and styrene butadiene rubber (SBR) with the ratio of ethylene vinyl acetate:elastomer 30:70, 50:50, and 70:30 by weight using 10, 20, and 30 phr of silica and 5, 10, and 15 phr of 3 mm coconut coir as additives for improving sound insulation property of polymer blend. Alumina and bentonite 10, 30, and 50 phr were used as additives to improve flame retardation property of polymer blend.
The specimens were prepared with the use of a two-roll mill at 130 °C for mixing ethylene vinyl acetate and elastomer and mixing polymer blend with additives. The polymer blend was then formed at 130 °C using acompression molding. Sound insulation property, hardness, tensile strength, specific gravity, and flame retardation were tested by comparative study of the properties of ethylene vinyl acetate with the prepared polymer blend with the purpose of replacing the use of ethylene vinyl acetate in sound insulation manufacturing of automotive industry with the polymer blend from this research, in order to reduce production costs and add value to elastomer.
The research results showed that the ratio of ethylene vinyl acetate: elastomer 30:70, 50:50, and 70:30 by weight showed similar specific gravity to that of ethylene vinyl acetate (EVA) but it has lower hardness, tensile strength, sound transmission class (STC) , and flame retardation property. The addition of silica at 20 phr resulted in the sound insulation property of ethylene vinyl acetate: elastomer at the ratio of 70:30 by weight to sound transmission class of 33 which is higher than ethylene vinyl acetate (EVA) . Hardness and specific gravity are similar to ethylene vinyl acetate (EVA) . Flame retardation property was tested usinghorizontal burning test (HB). It passed the standard which has a slower combustion speed than ethylene vinyl acetate (EVA) , but tensile strength is less than ethylene vinyl acetate (EVA) . It can be concluded that ethylene vinyl acetate: elastomer at a ratio of 70:30 by weight with the addition of silica at 20 phr can be used to produce sound insulation in cars for substituting ethylene vinyl acetate, in order to reduce production costs and add value to elastomer.