Abstract:
ในปัจจุบันระบบสายส่งไฟฟ้าของการไฟฟ้าส่วนภูมิภาค(กฟภ.) มีการเชื่อมต่อกับกำลังผลิตไฟฟ้าขนาดเล็กแบบกระจายตัว(Distributed Generation, DG) ที่ผลิตไฟฟ้าจากพลังงานทดแทน เช่น พลังงานลม พลังงานแสงอาทิตย์เป็นต้นโดยมีติดตั้งกระจายตัวอยู่ในระบบไฟฟ้าและมีกำลังการผลิตที่ไม่แน่นอนทำให้มีความเป็นพลวัตเพิ่มมากขึ้น ซึ่งระบบการตรวจวัดแบบดั้งเดิมนั้นไม่เพียงพอที่จะตรวจวัดความเป็นพลวัตที่เพิ่มมากขึ้นนั้นได้ วิทยานิพนธ์ฉบับนี้จึงได้นำเสนอการพัฒนาระบบเฝ้าสังเกตพลวัตสำหรับระบบสายส่งไฟฟ้าระดับแรงดัน 115 kV ของ กฟภ. ด้วยเทคโนโลยีการวัดแบบประสานเวลาโดยใช้ข้อมูลการวัดจากเครื่องวัดเฟสเซอร์ (PMU) อ้างอิงตามมาตรฐาน IEEE C37.118.1 และ IEEE C37.118.2 ในกระบวนการศึกษาวิจัยได้จำลองระบบสายส่งไฟฟ้าระดับแรงดัน 115 kV ด้วยโปรแกรม DIgSILENT PowerFactory และจำลองระบบเฝ้าสังเกตพลวัตด้วยโปรแกรม MATLAB เพื่อศึกษาแนวทางในการประยุกต์ใช้งานเทคโนโลยีการวัดแบบประสานเวลาสำหรับพัฒนาระบบเฝ้าสังเกตพลวัต โดยพิจารณาปัจจัยต่างๆ ประกอบด้วยคุณภาพ การวัดอัตราการวัด การสื่อสารและการจัดเก็บข้อมูลระหว่างอุปกรณ์ต่างๆ ที่เหมาะสมในการพัฒนาระบบ ซึ่งช่วยเพิ่มความสามารถในการรับรู้ถึงสภาวการณ์ต่างๆ ที่เกิดขึ้นในระบบสายส่งไฟฟ้าซึ่งมีความเป็นพลวัตเพิ่มมากขึ้นได้
Recently, distributed generations (DGs) with renewable energy resource such as wind and solar energy, are increasingly connected to (Provincial Electricity Authority)PEA distribution network. The renewable DGs arehardly predictable and could add more dynamic behaviors to power system. The traditional monitoring system cannot accurately observe the dynamic behaviors increased due to renewable DGs. Accordingly, this thesis proposes developmentof dynamic monitoring system for 115 kV PEA distribution network based on synchronized measurement technology (SMT). The dynamic monitoring system utilizes synchronized measurement data provided by Phasor Measurement Units (PMU). The study considers the accuracy and data transfer of synchronized measurement data according to IEEE standards (C37.118.1 and C37.118.2). The simulation model of 115 kV PEA distribution network is developed by DIgSILENT PowerFactory and the simulation modelof dynamic monitoring system is developed by MATLAB. The simulation models are studied asguidelines for development of dynamic monitoring system based on SMT. The study considers the appropriate specification of SMT for 115 kV PEA distribution network such as measurement data, reporting rates, communication and data storage. The studied results revealguidelines for developing dynamic monitoring system which isneeded for observing the situational awareness of115 kV PEA distribution network.