Abstract:
งานวิจัยนี้มุ่งเน้นศึกษาการพัฒนาแบบจำลองทางคณิตศาสตร์ด้วยวิธีประยุกต์กำหนดการเชิงเส้นแบบหลายวัตถุประสงค์ร่วมกับเทคนิคการประเมินวัฏจักรชีวิตผ่านกรณีศึกษาภาชนะบรรจุชนิดอ่อนตัวสำหรับข้าวสาร ได้แก่ ถุงพลาสติกหลายชั้น CPP/LLDPE ขนาดบรรจุ 5 กิโลกรัม และถุงกระสอบพลาสติก PP ขนาดบรรจุ 30 กิโลกรัม เพื่อสร้างทางเลือกในการตัดสินใจด้านการผลิตภาชนะบรรจุภายใต้การเปรียบเทียบข้อดี-ข้อเสีย (tradeoffs) ระหว่างวัตถุประสงค์ด้านต้นทุนทั้งหมดและศักยภาพการก่อให้เกิดภาวะโลกร้อน โดยมีขอบเขตการศึกษา ครอบคลุมตั้งแต่การได้มาซึ่งวัตถุดิบ การขนส่งวัตถุดิบ ตลอดจนการผลิตภาชนะบรรจุ (cradle to gate) และได้กำหนดหน่วยหน้าที่การทำงานคือ การบรรจุข้าวสารปริมาณ 120,000 กิโลกรัม จากผลการศึกษาพบว่า แบบจำลอง นี้สามารถตัดสินถึงปริมาณการใช้วัตถุดิบที่เหมาะสมและสอดคล้องกับความพึงพอใจของผู้ผลิตภาชนะบรรจุ นั่นคือ ปริมาณวัตถุดิบที่เหมาะสมที่สุดหรือผลลัพธ์ที่ได้จากแบบจำลองสำหรับถุงพลาสติกหลายชั้น CPP/LLDPE และถุงกระสอบพลาสติก PP มีการพัฒนาเหนือค่าต้นแบบที่ได้จากข้อมูลการผลิตจริง ทั้งนี้ต้นทุนทั้งหมดและศักยภาพการก่อให้เกิดภาวะโลกร้อนสำหรับการผลิตถุงพลาสติกหลายชั้น CPP/LLDPE มีค่าต่ำสุดเท่ากับ 176,876.69 บาทและ 2,944.23 กิโลกรัมคาร์บอนไดออกไซด์เทียบเท่าหรือมีอัตราการลดลงคิดเป็นร้อยละ 0.13 และ 0.28 ตามลำดับ โดยมีสาเหตุสำคัญจากการปรับปริมาณการใช้วัตถุดิบทางตรงในขั้นตอนการขึ้นรูปฟิล์ม เช่นเดียวกับต้นทุนทั้งหมด และศักยภาพการก่อให้เกิดภาวะโลกร้อนสำหรับการผลิตถุงกระสอบพลาสติก PP ซึ่งมีค่าต่ำสุดเท่ากับ 27,250.73 บาทและ 6,210.45 กิโลกรัมคาร์บอนไดออกไซด์เทียบเท่า หรือมีอัตราการลดลงคิดเป็นร้อยละ 1.02 และ 0.20 ตามลำดับ อันเนื่องมาจากการปรับปริมาณการใช้วัตถุดิบทางตรงในขั้นตอนการผลิตเส้นเทปเป็นหลัก ด้วยเหตุนี้ แบบจำลองที่พัฒนาขึ้นจึงมีประโยชน์ยิ่งต่อการนำไปใช้เป็นเครื่องมือสนับสนุนการตัดสินใจแบบหลายวัตถุประสงค์ของอุตสาหกรรมผู้ผลิตภาชนะบรรจุพลาสติกชนิดอ่อนตัว เพื่อพัฒนาประสิทธิภาพทางด้านต้นทุนทั้งหมดและศักยภาพการก่อให้เกิดภาวะโลกร้อนในระบบการผลิต อีกทั้งยังสามารถใช้เป็นแบบจำลองพื้นฐานในการต่อยอดงานวิจัยภายใต้กรณีศึกษาภาชนะบรรจุพลาสติกชนิดอ่อนตัวประเภทอื่น ๆ เพิ่มเติม เพื่อพิจารณาเปรียบเทียบและ เสนอแนะแนวทางการตัดสินใจด้านการผลิตอย่างเหมาะสม
This research aimed to develop a mathematical model by incorporating multi-objective linear programming (MOLP) with life cycle assessment (LCA) technique through a case study of flexible packaging for rice, including 5 kg-sized CPP/LLDPE multi-layered bag and 30 kg-sized PP woven bag. The incorporated model was employed to generate decision alternatives for packaging production, which is the consequence of trade-offs between two objectives: total cost and global warming potential. The system boundary covered the acquisition of raw materials, transportation of raw materials and manufacture of the packaging (cradle to gate). The functional unit was chosen as 120,000 kg rice. It was found that this model could determine an optimal usage of raw materials based on manufacturer's preference. That is, in both case studies, an optimal quantity of raw materials or the results obtained from the model showed the improvement over their typical values occurred during the actual production. The minimized values of total cost and global warming potential for CPP/LLDPE multi-layered bag were 176,876.69 THB and 2,944.23 kg CO2 eq, or achieved the reduction rates of 0.13% and 0.28%, respectively. Such improvement is majorly caused by modification of the direct materials used in the blown film process. Similarly, the minimized values of total cost and global warming potential for PP woven bag were 27,250.73 THB and 6,210.45 kg CO2 eq, or achieving the reduction rates of 1.02% and 0.20%, respectively. The major improvement is due to modification of the direct materials used in the tape extrusion process. To this end, the developed model is useful as a multi-criteria decision support tool for flexible packaging manufacturers to improve total cost and global warming potential in their production system. In addition, the model can be used as a guideline for other forms of flexible packaging to compare and provide suitable alternatives of the production.