Abstract:
Air passive sampler (APS) or air diffusive sampler is a portable unit used for monitoring the lavel of
air pollutants such as SO2 and NO2. The essential component of APS is an absorption membrane
(conventionally made from nylon, teflon of cellulose) containing deposited active agent the reacts
with a specific pollutant. This research aims to prepare sheet of nanofibers with controlled size and
morphology via electrospinning process and to use the nanofiber membrane as an improved
absorption membrane in APSs. The polymer used in this study was Nylon-6 (MW~10,000 Dalton)
dissolved in formic acid. The electrospinning process was performed at room temperature using
home-built equipment. Nanofibers size and morphology were studied as a function of solution
concentration (15 - 35 % by weight), applied voltage (10 - 20 kV) and a distance from the syringe
tip to a grounded target, D (5 - 15 cm). Electrospun nylon nanofibers with the size of 50-60 nm
were obtained from the solution (20 % by weight) at 20 kV and the distance of 20 cm. The obtained
non-woven nanofibers membrane was spun onto cellulose filtering paper. The APSs containing
nanofiber membrane were used to collect NO2 in ambient air. It was found that the APSs containing
nanofibers could collect NO2 at the faster rate than those with standard cellulose filtering membrane.
The APSs that yielded the best absorption were those with membrane containing nanofiber
electrospun for 45 minutes and the solution of active agents containing 0.176 NaOH and 0.416 M
NaI (80 % of the concentration used for the standard cellulose membrane) and the sampling period
of 120 hours.