Abstract:
Gasification of cassava rhizome for production of fuel product was performed in this work. Cassava rhizome is the neck between stalk and tube. It is a short woody part connected the tube to the rest of the plant that is typically discarded, burnt or land filled by farmer, which creates not only adverse effect on the environment but also loss of potential energy source. The main objective in this research is to investigate the feasibility of gasification of cassava rhizome for synthesis gas (CO + H2) production, using a fixed bed reactor. The influence of operating parameters such as gasification temperatures (600 900 °C) and equivalence ratio (ER) of 0.2 0.6 were studied. Gas yields, H2/CO ratio and lower heating value (LHV) of gas product were measured. ER 0.4, reaction temperature of 900°C, indicated that ER 0.4 yielded the highest conversion. H2/CO ratio was 0.6 and LHV of gas product was 4.12 MJ/ Nm3 while addition of Ni/Al2O3 catalyst improved CO and H2 conversion for 1.6 and 1.33 times, respectively. LHV of gas product was 8.61 MJ/Nm3 at temperature of 800°C and ER of 0.4. In case of Ni-La-Mg, Co, CeO2 and Fe supported alumina and calcined dolomite catalyst, the highest gas yield was 83.13% when used Fe/Al2O3.