Abstract:
The objective of this research is to investigate the removal efficiencies of nitrogen in two-sludge sequencing
batch process that consisted of anaerobic-anoxic-aerobic sequencing batch reactor (A2O-SBR) and nitrification
sequencing batch biofilm reactor (N-SBBR). Synthetic wastewater at COD/N ratio of 4:1 was applied with
acetic acid and ammonium chloride as organic carbon and nitrogen sources respectively. The organic loadings
were varied at 0.53, 0.80 and 1.06 kg COD /m3-d by two approaches, first by varying hydraulic retention time
(HRT) and second by varying influent COD concentrative. In experiment of controlling HRT, HRT was varied
at 18, 12 and 9 hrs. and in experiment of controlling influent COD, the influent COD was varied at 400, 600 and
800 mg-COD/l . The results showed that these was no significant difference in nitrogen as well as COD removal
efficiencies between experiments by varying HRT and influent COD at the same organic loadings. At highest organic
loading applied in this study (1.06 kg COD /m3-d), the removal efficiencies were slightly lower with percent removal
of nitrogen and COD not less than 74 and 95 respectively. However higher organic loadings were applied, higher
organic removal loadings were obtained, that are of 0.18, 0.27 and 0.31 kg COD /kg MLSS-d in experiment of
controlling HRT and 0.15, 0.20 and 0.20 kg COD /kg MLSS-d in experiment of controlling influent COD at organic
loadings of 0.53, 0.80 and 1.06 kg COD /m3-d respectively. In the N-SBBR, complete ammonia oxidation occurred
in all experiments however nitrite was accumulated at the higher organic loading and could be completely utilized
at anoxic phase in the A2O-SBR.