Abstract:
Nimbin was extracted from neem seed using supercritical CO2 as a solvent andmethanol as a co-solvent. Nimbin was extracted from neem seeds over a range ofoperating conditions: using a supercritical CO2 flow rate of 0.24 to 1.24 cm3/min, 10 to26 MPa, 308 to 333 K, neem sample weight of 1 to 2.5 g and an average particle sizefrom 575 to 1850 .m. The effect of the process parameters, flow rate, pressure,temperature, weight of neem sample and average particle size of nimbin extraction werestudied. In addition, the effects of the CO2 to methanol ratio and temperature on theextraction were investigated. These experiments were performed at 20 MPa and amethanol conentration ranging from 2 to 10 percent v/v and from 303 to 328 K.iiiExtraction yield curves were estimated using three empirical models and a theoreticalmodel.From the experiments, nimbin extraction yield using supercritical carbon dioxide wereapproximately 68 %; the extraction yield was 0.18 mg nimbin per gram of neem kernelpowder (neem kernel powder are known to contain about 0.2646 mg nimbin per gram ofneem kernel powder). The best extraction conditions from each experiment were foundto be; 308 K, 23 MPa and a supercritical CO2 flow rate of 1.24 cm3/min for a 2 gramsample of neem. An optimum pressure of extraction appears to exist at about 23 MPa ata temperature of 328 K. The extraction rate was not found to be a function of sampleweight in bed for the range of sample studied. The variation of temperature andmethanol was not found to improve the extraction efficiency.Extraction curves were estimated using three empirical models and a theoretical model.The three empirical models were Langmuir-type gas adsorption model, a first order plusdead time model, FOPDT, and the third model is a cyclone model. The correlationresults were compared with experimental data; the empirical models correlate the resultsbest in part because their parameters were fitted using the experimental data. Thetheoretical model also fit most of the experimental data, with the exception the particlesize experiments. The extraction rate predicted by the theoretical model dependedstrongly on the solvent flow rate, indicating that external mass transfer or equilibrium isthe controlling step of this process