Abstract:
In this research, pyrolysis experiments were carried out using thermogravimetric analysis (TGA) and a fixed-bed quartz reactor. The biomass used was Jatropha curcas linn (Physic Nut) waste. The objective of this research is to study the effect of temperature and holding time on product distribution. It was found that the main thermal decomposition of physic nut waste generally occurred over the temperature range of 150-450°C. The parallel reaction kinetic model was applied for simulating the degradation of physic nut waste. The three parallel reaction model agreed relatively well with the experimental data. From the model, the activation energy of hemicelluloses, cellulose and lignin were in the range of 40-60 kJ/mol, 185-235 kJ/mol and 90-150 kJ/mol, respectively. Reaction orders of those fractions were in the range of 2.35-3.50. The results from a fixed-bed reactor pyrolysis process indicated that raised in temperature and holding time lead to an increase in the production of hydrogen gas, methane gas and light hydrocarbons with highest gas production measured at 900°C. Tar (liquid oil) destruction at the higher temperatures caused the decrease in the liquid yield while the gas yield and the total conversion increased. Liquid oil consisted of fatty acids such as palmetic acid, stearic acid, oleic acid and linoleic acid. Their contents were in the range of 10-23 % palmetic acid, 5-12%, stearic acid, 35-42% oleic acid 29-38% linoleic acid, respectively. The amount of char residue decreased with increasing reactor temperature and holding time. Analysis of char indicated that when temperature was raised, there was increase in fixed carbon yields and decreased in volatile matter with little change on ash content.