กำลังแสดงหน้าที่ 1/3
แยกตามชนิดเอกสาร
แยกตามหน่วยงาน
ผลการสืบค้นหัวเรื่อง ขึ้นต้นด้วยตัวอักษร Steel มีข้อมูลจำนวน 50 รายการ
ลำดับที่.หัวเรื่อง(จำนวนรายการ)
1Steel (67)
(1) Improvement of abrasive wear property of high-strength low-alloy steel plate ASTM A572 by Hardfacing welding process
Nuengruetai Kumsri ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(2) Study on impact responses of pultruded gfrp, steel and aluminum beams by using drop-weight impact test
Sittichai Seangatith ;มหาวิทยาลัยเทคโนโลยีสุรนารี (บทความ/Article)
(3) Experimental investigation on square stell tubed RC columns under axial compression
Sittichai Seangatith;Jaksada Thumrongvut ;มหาวิทยาลัยเทคโนโลยีสุรนารี (บทความ/Article)
(4) Application of data reconciliation for steel pickling process
Pornsiri Kaewpradit ;จุฬาลงกรณ์มหาวิทยาลัย (วิทยานิพนธ์/Thesis)
(5) Effect of steel fibers and fly ash on concrete strength
Nitima Tantadilok ;มหาวิทยาลัยเกษตรศาสตร์ (วิทยานิพนธ์/Thesis)
(6) Behavior of steel bracket connection with reinforced concrete column
Samart Chantarapim ;มหาวิทยาลัยเกษตรศาสตร์ (วิทยานิพนธ์/Thesis)
(7) Flexural behavior of posttensioned steel trusses with high performance concrete composite decks
Kanokpat Chanvaivit ;จุฬาลงกรณ์มหาวิทยาลัย (วิทยานิพนธ์/Thesis)
(8) Buckling behavior of cold-formed steel sigma section under axial compression
Panya Klongaksornkul ;มหาวิทยาลัยเกษตรศาสตร์ (วิทยานิพนธ์/Thesis)
(9) รายงานการวิจัยความต้านทานการกัดกร่อนของเหล็กกล้า AISI 4140 ที่เคลือบผิวด้วยไอทางกายภาพ
พรวสา วงศ์ปัญญา ;ประยูร ส่งสิริฤทธิกุล;นิรันดร์ วิทิตอนันต์ ;มหาวิทยาลัยเทคโนโลยีสุรนารี (งานวิจัย/Research report)
(10) อิทธิพลสารละลายโซเดียมคลอไรด์ต่ออัตราการกัดกร่อนในรอยต่อเกยระหว่างอลูมิเนียมและเหล็กในอุตสาหกรรมรถยนต์
ปรกช สิริสุวัณณ์;ศักดิ์ชัย จันทะศรี ;กิตติพงษ์ กิมะพงศ์ ;มหาวิทยาลัยเทคโนโลยีราชมงคลธัญบุรี (งานวิจัย/Research report)
(11) Application of waste from steel production industry in polyester resin
Apichai Amonpisut ;มหาวิทยาลัยมหิดล (วิทยานิพนธ์/Thesis)
(12) Physico-chemical characterisation and ashesion behaviour of thermal oxide scales formed on recycled steels
Thanasak Nilsonthi ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(13) Polyanilinemontmorillonite nanocomposites for corrosion protection of steel
Pattama Piromruen ;จุฬาลงกรณ์มหาวิทยาลัย (วิทยานิพนธ์/Thesis)
(14) การวิเคราะห์การถ่ายเทความร้อนและการเผาไหม้ของเตาเผาเหล็กกล้าโดยการประยุกต์ใช้การคำนวณทางพลศาสตร์ของไหล
จีรวัตร ตรีพิเชฐกุล ;จุฬาลงกรณ์มหาวิทยาลัย (วิทยานิพนธ์/Thesis)
(15) Investigation of phase transformation in steels during hot working process
Prakaln phetlam;Vitoon Uthaisangsuk ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (บทความ/Article)
(16) Modeling of temperature change of liquid steel in BOF by neural network
Kitisak Ngamjaruskochakorn ;จุฬาลงกรณ์มหาวิทยาลัย (วิทยานิพนธ์/Thesis)
(17) Assessment of the formability of a low-carbon steel sheet
Chen, Lixin ;จุฬาลงกรณ์มหาวิทยาลัย (วิทยานิพนธ์/Thesis)
(18) The application of particle-induced prompt photon emission spectrometry for chemical analysis - the determination of minor and trace components in steels
Dherendra Gihwala;Johan Andre Mars ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
(19) Sealing of thermally-sprayed stainless steel coatings against corrosion using nickel electroplating technique
Hathaipat Koiprasert;Panadda Niranatlumpong ;มหาวิทยาลัยสงขลานครินทร์. สำนักทรัพยากรการเรียนรู้คุณหญิงหลง อรรถกระวีสุนทร (บทความ/Article)
(20) Increasing the dimensional accuracy of U-bend product of high strength steel sheets by controlling the counter punch
Komgrit Lawanwong;Pongsakorn Leetrakul ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
(21) Increasing the dimensional accuracy of U-bend product of high strength steel sheets by controlling the counter punch
Komgrit Lawanwong;Pongsakorn Leetrakul ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
(22) Increasing the dimensional accuracy of U-bend product of high strength steel sheets by controlling the counter punch
Komgrit Lawanwong;Pongsakorn Leetrakul ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
(23) Increasing of hole expansion ratio of high strength steel sheet by using piercing process with counter pressure from a counter punch
Prasan Sengkaew;Pongsakorn Leetrakul;Komgrit Lawanwong ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
(24) Influence of welding current in resistance spot welding on the properties of Zn coated steel DX51D
Luboš Kaščák;Ján Viňáš;Rudolf Mišičko ;มหาวิทยาลัยสงขลานครินทร์. สำนักทรัพยากรการเรียนรู้คุณหญิงหลง อรรถกระวีสุนทร (บทความ/Article)
(25) Effect of vanadium and niobium alloying elements on the microstructure andmechanical properties of a drop forging microalloyed HSLA steel
Ganwarich Pluphrach ;มหาวิทยาลัยสงขลานครินทร์. สำนักทรัพยากรการเรียนรู้คุณหญิงหลง อรรถกระวีสุนทร (บทความ/Article)
(26) Corrosion protection of carbon steel by coating with epoxy polyester powder containing zinc and polyaniline
Sureerat Tipoo ;จุฬาลงกรณ์มหาวิทยาลัย (วิทยานิพนธ์/Thesis)
(27) Generation mechanism of acoustic emission signals from corrosion under coating film by ae source wave analysis
Sugimoto, A.;Matsuo, T. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
(28) Effects of carbon content and rolling temperature on mechanical adhesion of oxide to 6 mm hot-rolled low carbon steel strip
Thinnakorn Phadungwong. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(29) Effects of carbon content and rolling temperature on mechanical adhesion of oxide to 6 mm hot-rolled low carbon steel strip
Thinnakorn Phadungwong. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(30) Laboratory investigations of sand-smooth steel interface under monotonic and cyclic loadings
Chaisit Pengjam;Suriyavut Pra-ai;Kwansirinapa Thanawong;Palinee Sumitsawan ;มหาวิทยาลัยสงขลานครินทร์. สำนักทรัพยากรการเรียนรู้คุณหญิงหลง อรรถกระวีสุนทร (บทความ/Article)
(31) Influence of prior austenite grain size distribution on the microstructure and mechanical properties of a welded micro-alloyed ABS EH36 steel
Ganwarich Pluphrach;Tri Kharanan ;มหาวิทยาลัยสงขลานครินทร์. สำนักทรัพยากรการเรียนรู้คุณหญิงหลง อรรถกระวีสุนทร (บทความ/Article)
(32) Wear Behavior of Hardfacing on 3.5% Chromium Cast Steel by submerged Arc Welding
Hein Zaw Oo ;มหาวิทยาลัยสงขลานครินทร์. สำนักทรัพยากรการเรียนรู้คุณหญิงหลง อรรถกระวีสุนทร (วิทยานิพนธ์/Thesis)
(33) Corrosion protection of reinforcing steel in RC structures by sacrificial anode
Aris Mahasiripan ;มหาวิทยาลัยธรรมศาสตร์ (วิทยานิพนธ์/Thesis)
(34) Test on cold-formed steel box beams made of C20019 sections
Seng, Sophea;Taweep Chaisomphob;Wasan Patwichaichote ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
(35) Experiment on cold-formed steel I beams made of C150 sections
Khiev, Ty;Taweep Chaisomphob;Wasan Patwichaichote ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
(36) Application of CCT diagram developed by dilatometer to determine the parameters affected case depth for induction hardening process to prevent quench crack of 40Mn2
Tossapon Chettaisong. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(37) Application of CCT diagram developed by dilatometer to determine the parameters affected case depth for induction hardening process to prevent quench crack of 40Mn2
Tossapon Chettaisong. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(38) Study of thermal oxide scales on hot-rolled carbon steel strips produced from EAF-type slab and different Si-containing bf-type slabs
Jennarong Tungtrongpairoj. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(39) Study of thermal oxide scales on hot-rolled carbon steel strips produced from EAF-type slab and different Si-containing bf-type slabs
Jennarong Tungtrongpairoj. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(40) Effect of rolling temperature on mechanical adhesion and pickling behavior of oxide scale on hot-rolled low carbon steel strips
Komsan Ngamkham ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(41) Effect of rolling temperature on mechanical adhesion and pickling behavior of oxide scale on hot-rolled low carbon steel strips
Komsan Ngamkham ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(42) Effect of rolling temperature on mechanical adhesion and pickling behavior of oxide scale on hot-rolled low carbon steel strips
Komsan Ngamkham ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(43) Effect of rolling temperature on mechanical adhesion and pickling behavior of oxide scale on hot-rolled low carbon steel strips
Komsan Ngamkham ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(44) Determination and analysis of critical damage criteria for predicting fracture in forming process by uniaxial tensile test
Sermpong Niemsakul ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(45) Investigation on flexural behavior of cold-formed steel c back-to-back beams
Kang, Kimcheng ;มหาวิทยาลัยธรรมศาสตร์ (วิทยานิพนธ์/Thesis)
(46) ความสามารถในการดัดขึ้นรูปและลัษณะความเสียหายของเหล็กกล้าความแข็งแรงสูงพิเศษภายใต้กระบวนการดัดขึ้นรูปแบบอิสระ
ณัฐศักดิ์ พรพุฒิศิริ ;สถาบันเทคโนโลยีพระจอมเกล้าเจ้าคุณทหารลาดกระบัง (วิทยานิพนธ์/Thesis)
(47) Study on inspection and evaluation of damaged steel structure in Thailand
Warakorn Tantrapongsaton ;มหาวิทยาลัยธรรมศาสตร์ (วิทยานิพนธ์/Thesis)
(48) การพยากรณ์การเสียรูปของแผ่นเหล็กกล้าในกระบวนการชุบเคลือบสังกะสีแบบจุ่มร้อนโดยทฤษฎีการวิเคราะห์จำแนกประเภท กรณีศึกษา โรงงานชุบเคลือบสังกะสีแบบจุ่มร้อน
วีรวัฒน์ แซ่เหีย ;สถาบันเทคโนโลยีพระจอมเกล้าเจ้าคุณทหารลาดกระบัง (วิทยานิพนธ์/Thesis)
(49) Effect of surface coating and leaching on carbonation and steel corrosion of reinforced concrete
Van Binh, Duong ;มหาวิทยาลัยธรรมศาสตร์ (วิทยานิพนธ์/Thesis)
(50) Numerical modeling for corrosion rate between heat-affected zone and unaffected base metal of galvanized steel welded by brazing
Adisak Pinyo.;Sompong Bangyeekhan.;Trinet Yingsamphancharoen.;Aphichart Rodchanarowan. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
(51) Improvement of abrasive wear property of high-strength low-alloy steel plate ASTM A572 by Hardfacing welding process
Nuengruetai Kumsri ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(52) Improvement of abrasive wear property of high-strength low-alloy steel plate ASTM A572 by Hardfacing welding process
Nuengruetai Kumsri ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(53) Improvement of abrasive wear property of high-strength low-alloy steel plate ASTM A572 by Hardfacing welding process
Nuengruetai Kumsri ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(54) A Thermodynamic Investigation on Corrosion of Cu-bearing Steel in Aqueous Solutions
C. Peeratatsuwan ;สถาบันเทคโนโลยีปทุมวัน (บทความ/Article)
(55) Modelling hydrogen permeation in a hydrogen effusion probe for monitoring corrosion of carbon steels
Pongpat Santiwiparat ;จุฬาลงกรณ์มหาวิทยาลัย (วิทยานิพนธ์/Thesis)
(56) Modelling hydrogen permeation in a hydrogen effusion probe for monitoring corrosion of carbon steels
Pongpat Santiwiparat ;จุฬาลงกรณ์มหาวิทยาลัย (วิทยานิพนธ์/Thesis)
(57) ผลกระทบของโครงสร้างจุลภาคในเหล็ก 9Cr-1Mo ที่ใช้งานอุณหภูมิสูงต่อสัญญาณสนามแม่เหล็กไฟฟ้า
กิตตินันท์ สดใส;Kittinan Sodsai ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
(58) Experimental and computational study of shot peening and cold spray process for SKD11
Pudsadee Chupong ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(59) Corrosion inhibition studies of tamarind shell tannins on mild steel in acidic medium
Abdullahi, Abdulmajid;Hussin, M. Hazwan ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
(60) Application of plasma transferred arc and spray and fuse coatings to enhance hardness and wear resistance of AISI 1045 steel
Saifon Srisaart. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(61) การสร้างหลุมขนาดเล็กด้วยเลเซอร์เพื่อปรับปรุงคุณสมบัติแรงเสียดทานของพื้นผิวเหล็กกล้าเครื่องมือ SKH51
Chansovannkumpheak Phun ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
(62) Development of creep testing machine and validation cases of ASTM A36 steel property
Pavaret Preedawiphat;Numpon Mahayotsanun numpon@kku.ac.th;Keerati Sa-Ngoen;Mai Noipitak;Pongsak Tuengsook;Sedthawatt Sucharitpwatskul;Sasawat Mahabunphachai ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
(63) Effect of steel and polypropylene fibers on concrete properties after exposure to high temperature
Prae Suwanvitaya ;มหาวิทยาลัยเกษตรศาสตร์ (วิทยานิพนธ์/Thesis)
(64) Lateral load capacity of concrete filled steel tube wall (CFST) using cold-formed C-sections
Gokarna Sujwal ;มหาวิทยาลัยเกษตรศาสตร์ (วิทยานิพนธ์/Thesis)
(65) Investigating process parameters and sample size influence on heat behavior and material characteristics for coating improvement in PTA processes
Palida Hama. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(66) Investigating process parameters and sample size influence on heat behavior and material characteristics for coating improvement in PTA processes
Palida Hama. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
(67) Solving the Inverse Problems of Microstructural Mechanical Properties with Machine Learning
Kullapong Lertkiatpeeti;กุลพงศ์ เลิศเกียรติปิติ ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
2steel bar (4)
(1) รายงานการวิจัยการสร้างแผนการตัดวัสดุก่อสร้างเชิงเส้นเพื่อลดเศษในงานก่อสร้าง
วชรภูมิ เบญจโอฬาร ;มหาวิทยาลัยเทคโนโลยีสุรนารี (งานวิจัย/Research report)
(2) การพัฒนาเสาท่อเหล็กกรอกคอนกรีตที่ใช้ไฮบริดซีเมนต์เสริมกำลังโดยเหล็กเส้นสำหรับโครงสร้างพื้นฐานทางราง
จักษดา ธำรงวุฒิ ;มหาวิทยาลัยเทคโนโลยีราชมงคล อีสาน (งานวิจัย/Research report)
(3) การพัฒนาวัสดุเชื่อมประสานต้นทุนต่ำที่มีคุณสมบัติพิเศษสำหรับเหล็กเส้นในคอนกรีต
ขัตติย ชมพูวงศ์ ;มหาวิทยาลัยเทคโนโลยีราชมงคล อีสาน (งานวิจัย/Research report)
(4) การพัฒนาประสิทธิภาพเสาท่อเหล็กกรอกคอนกรีตเสริมกําลังโดยเหล็กเส้น สําหรับการประยุกต์ใช้ในงานอาคารและโครงสร้างพื้นฐาน
จักษดา ธํารงวุฒ ;มหาวิทยาลัยเทคโนโลยีราชมงคล อีสาน (งานวิจัย/Research report)
3Steel beam to concrete column connection (1)
(1) ตารางสำหรับการออกแบบจุดต่อเพื่อรับแรงเฉือนระหว่างโครงสร้างเหล็กกับคอนกรีต
อำนวย ทุ่งมาศ;Amnuay Thungmas ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
4Steel braces (1)
(1) Seismic Retrofit of RC frame building with steel brace
Rawirot Suwannatrai;Hlaing, Hnin Hnin;Tharathep Phuchanakit1 ;Paloch Petpanvong;Panumas Saingam ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
5Steel Casting (1)
(1) การลดข้อบกพร่องประเภทโพรงหดตัวในชิ้นส่วนงานหล่อของช่วงล่างรถบรรทุก
สุรธวัช จินาพันธ์ ;Surathawat Jinaphan ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
6Steel catenary riser (1)
(1) Large amplitude free vibration of large-sag extensible caternary risers
Ong-art Punjarat;องอาจ ปัญจรัตน์ ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
7Steel Corbel (1)
(1) จุดต่อโครงสร้างระหว่างองค์อาคารเหล็กและองค์อาคารคอนกรีตเสริมเหล็ก
สุธน รุ่งเรือง ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
8Steel cord rubber composite. (1)
(1) Shock and perforation resistance on the radial truck tires
Naruepon Eiamnipon ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
9Steel corrosion (1)
(1) Evaluation of atmospheric exposure test on structural steel coated with different materials in the east of Thailand
Lhamo, Ugen Tashi ;มหาวิทยาลัยธรรมศาสตร์ (วิทยานิพนธ์/Thesis)
10Steel fiber (4)
(1) ผลกระทบของชนิด ความยาว และปริมาณของเส้นใยต่อสมบัติเชิงกล การหดตัว และการคืบของคอนกรีตสมรรถนะสูงที่ผสมเถ้าก้นเตาบดละเอียด
ณัฐวัตร เหมือนเหลา;Nattawat Mhuanlhao ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
(2) Effects of aramid fibers in corroded reinforced concrete beams
Suphawit Untimanon ;มหาวิทยาลัยธรรมศาสตร์ (วิทยานิพนธ์/Thesis)
(3) การประเมินกำลัง การคืบอัด และความสามารถในการทนไฟของคอนกรีตสมรรถนะสูงเสริมเส้นใยเหล็กที่มีเถ้าก้นเตาแทนที่ปูนซีเมนต์และมวลรวมละเอียด
ฉัตรกมล ตาแดง;Chatkamon Tadang ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
(4) การศึกษาแรงยึดเหนี่ยวแบบเฉือนตรงระหว่างคอนกรีตเดิมกับคอนกรีตใหม่
วาสิฏฐกฤษ จันทร์เกตุ;Wasithagrit Jangate ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
11Steel Fiber Reinforced Concrete (1)
(1) แผนภูมิปฏิสัมพันธ์แรงดันและแรงตามแนวแกนสำหรับควบคุมรอยร้าวของคอนกรีตเสริมเส้นใยที่มีการเสริมเหล็กเส้นเพิ่มเติม
ดำริห์ อร่ามศรีประเสริฐ;Damri Aramseapraseart ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
12Steel fiber-reinforced concrete (SFRC) (1)
(1) Development of special concretes : underwater concrete, low binder self-compacting concrete and dry-cast steel fiber concrete
Samita Chaikasatsin ;มหาวิทยาลัยธรรมศาสตร์ (วิทยานิพนธ์/Thesis)
13Steel Fibers (1)
(1) ตัวแปรที่มีอิทธิพลต่อคุณสมบัติทางกลของคอนกรีตที่เสริมเส้นใยเหล็กแบบตะขอ
วทัญญู ชุติคามี;Watanyou Chutikamee ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
14Steel fibre (1)
(1) Tensile behaviour of high content steel and polypropylene fibre reinforced mortar
Piti Sukontasukkul ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (บทความ/Article)
15Steel forgings (1)
(1) การพัฒนาเส้นโค้งขีดจำกัดการขึ้นรูปของเหล็กกล้าความแข็งแรงสูง (NSC980D)
ชนาธิป ทองละมูล;Chanatip Tonglamool ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
16Steel forgings. (1)
(1) Optimization of preform part for hot forging process of axle shaft
Vachiraphan Sukjantha. ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ (วิทยานิพนธ์/Thesis)
17steel foundry dust (1)
(1) การหล่อแข็งกากตะกอนโลหะหนักจากระบบบำบัดน้ำเสียของโรงงานถลุงแร่สังกะสีโดยใช้ปูนซีเมนต์และฝุ่นทรายดำ
พิเชษฐ์ อธิภาคย์ ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
18Steel Frames (1)
(1) พฤติกรรมของโครงข้อแข็งเหล็กเสริมด้วยองค์อาคารยึดรั้งบริเวณข้อต่อภายใต้แรงแผ่นดินไหว
พัฒนพงศ์ มานะการ ;Pattanapong Manakarn ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
19Steel furnace slag (1)
(1) กำลังอัดของเถ้าลอยแคลเซียมสูงจีโอโพลิเมอร์คอนกรีตที่มีการใช้เถ้าตระกรันเหล็กเป็นมวลรวมหยาบ
ธนากร ภูเงินขำ ;มหาวิทยาลัยเทคโนโลยีราชมงคล อีสาน (งานวิจัย/Research report)
20Steel grit (1)
(1) อิทธิพลของชนิดและปริมาณมวลรวมละเอียดต่อกำลังอัดและการกันรังสีของคอนกรีต
ศรัณยู ศรีราช;Sarayoo Srirach ;มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี (วิทยานิพนธ์/Thesis)
ปีที่สร้างเอกสาร
หัวเรื่อง
ผู้สร้างสรรค์ผล งาน
    กำลังแสดงหน้าที่ 1/3
Copyright 2000 - 2025 ThaiLIS Digital Collection Working Group. All rights reserved.
ThaiLIS is Thailand Library Integrated System
สนับสนุนโดย สำนักงานบริหารเทคโนโลยีสารสนเทศเพื่อพัฒนาการศึกษา
กระทรวงการอุดมศึกษา วิทยาศาสตร์ วิจัยและนวัตกรรม
328 ถ.ศรีอยุธยา แขวง ทุ่งพญาไท เขต ราชเทวี กรุงเทพ 10400 โทร. โทร. 02-232-4000
กำลัง ออน์ไลน์
ภายในเครือข่าย ThaiLIS จำนวน 7
ภายนอกเครือข่าย ThaiLIS จำนวน 2,566
รวม 2,573 คน

More info..
นอก ThaiLIS = 163,543 ครั้ง
มหาวิทยาลัยราชภัฏ = 107 ครั้ง
มหาวิทยาลัยสังกัดทบวงเดิม = 106 ครั้ง
มหาวิทยาลัยเทคโนโลยีราชมงคล = 30 ครั้ง
มหาวิทยาลัยเอกชน = 9 ครั้ง
มหาวิทยาลัยสงฆ์ = 4 ครั้ง
หน่วยงานอื่น = 4 ครั้ง
สถาบันพระบรมราชชนก = 1 ครั้ง
มหาวิทยาลัยการกีฬาแห่งชาติ = 1 ครั้ง
รวม 163,805 ครั้ง
Database server :
Version 2.5 Last update 1-06-2018
Power By SUSE PHP MySQL IndexData Mambo Bootstrap
มีปัญหาในการใช้งานติดต่อผ่านระบบ UniNetHelp


Server : 8.199.134
Client : Not ThaiLIS Member
From IP : 216.73.216.124